Patreon
Home / Guides / SeedVR2 vs FlashVSR+ Video Upscaler Compared for Speed, VRAM

SeedVR2 vs FlashVSR+ Video Upscaler Compared for Speed, VRAM and Quality

By Furkan Gözükara · Updated Nov 21, 2026

In the SeedVR2 vs FlashVSR video upscaler choice, FlashVSR+ is the practical pick for whole videos: it is fast, runs from about 8 GB of VRAM and handles long footage in scene-based chunks. SeedVR2 is the slower, heavier model to use when a still image or a short, important shot needs the most natural detail. On the same 306-frame 960x540 clip upscaled 4x to 3840x2160 on an RTX 5090, FlashVSR+ Turbo took 5 min 02 s and SeedVR2 7B Sharp took 20 min 26 s.

Quick verdict

SeedVR2FlashVSR+
Best atStill images and short, high-value shotsFull videos and long footage
Time on the 4K test clip20 min 26 s (7B Sharp)5 min 02 s (Turbo)
VRAM shown in the tutorials8 GB with GGUF and FP8 modelsUnder 8 GB for HD video, a 16 GB GPU for 4K
Memory controlsOffload, BlockSwap, VAE tiling, GGUF and FP8VRAM-aware tiling and unload options, chunk size
Key settingsBatch size, blocks to swap, sparse ratio, tile sizeVersion, mode, scale, frame chunk size, DiT or VAE tiling

Both engines live in SECourses Upscaler Pro, a standalone app that does not depend on ComfyUI. It is available to members on Patreon.

Speed on the same 4K job

The Upscaler Pro post timed its video engines on one 306-frame 960x540 clip, upscaled 4x to 3840x2160 on a single RTX 5090:

EngineTime
RelayVSR (Wan INT8 ConvRot model)60 s
FlashVSR+ Turbo5 min 02 s
SeedVR2 7B Sharp20 min 26 s

FlashVSR+ Turbo finished about four times faster than SeedVR2 on this clip. On long footage that gap adds up quickly, which is why FlashVSR+ is the default choice for full videos.

The newer RelayVSR engine is faster still. A large Wan model with 5 billion parameters writes a sharp keyframe every 15 frames, and a small Flash decoder carries that detail to the frames in between. It always works at 4x and needs about 19 GB of VRAM for a 4K result with the whole Wan model on the GPU. On smaller cards, Auto Tune keeps fewer blocks on the GPU: with a 10 GB limit it made the identical 4K video, only slower.

VRAM and hardware

Both engines run on modest cards when you use their memory options:

  • FlashVSR+ is described as ultra optimized, fast and low VRAM, from as little as 8 GB. The Upscaler Pro tutorial video verifies HD video upscaling under 8 GB and analyzes a 4K upscale on a 16 GB GPU.
  • SeedVR2 reaches 8 GB cards through GGUF and FP8 models plus Max Blocks to Swap. Its advanced options cover offload, BlockSwap, VAE tiling, torch compile, the attention backend and cache toggles.

SeedVR2 used to be much heavier. In the July 2025 version of the app, now a legacy post, block swapping and tiled VAE were not working yet, and a 24 GB GPU could upscale video to 1280x720 at batch size 9 with a 23.5 GB peak during VAE decoding. The current app adds the block swap, tiling and GGUF options that bring SeedVR2 down to 8 GB cards.

The app runs on RTX 2000, 3000, 4000 and 5000 series cards and on H100, H200, B200 and RTX PRO 6000 GPUs. The installer sets up the latest Torch and CUDA with pre-compiled libraries, and torch compile works automatically.

Quality: where each one wins

  • Video: in the Upscaler Pro tutorial, FlashVSR+ upscales viral social media clips side by side with Topaz AI, and the slider comparisons show far more added detail than Topaz.
  • Images: SeedVR2 is the engine the tutorial uses for 4x image upscaling. The Upscaler Pro post notes that on a still picture SeedVR2 looks more natural than the fast RelayVSR video engine, and the older app found that SeedVR2 gives SUPIR-level quality or better, depending on the task.
  • Model size: the legacy notes recommended the SeedVR2 7B model for the best quality, and the speed test above used SeedVR2 7B Sharp.

A simple rule follows from the numbers: run FlashVSR+ on full videos, and spend SeedVR2's extra time on stills or on a short shot where detail matters most.

Settings that matter

SeedVR2

  1. Pick the model: GGUF or FP8 on small GPUs, the 7B model for the best quality.
  2. Raise Max Blocks to Swap until the model fits in VRAM.
  3. Set the batch size. In the earlier app, the batch size could only grow in steps of 4 (5, 9, 13, 17) because of the model's design.
  4. Use the sparse ratio and tile size limits to control memory at high resolutions.
  5. Use the first-frame preview before a long run.

FlashVSR+

  1. Pick the version and mode; the speed test used FlashVSR+ Turbo.
  2. Set the scale. The tutorial explains how downscaling, the 4x upscale and a custom target resolution work together.
  3. Tune the frame chunk size for speed and quality.
  4. Enable DiT tiling or VAE tiling to manage VRAM.

Long videos: scenes, chunks and resume

Both engines share the app's tools for long runs. PySceneDetect splits a video at scene changes, each chunk is upscaled on its own, and a stopped run resumes where it left off. That keeps quality consistent, prevents VRAM crashes and makes fully automated upscaling of movies longer than 120 minutes possible. The queue runs jobs one after another, and you can cancel a job without restarting the app.

Output options include H265 10-bit encoding, copying or re-encoding audio, RIFE frame interpolation and face restoration. The app can also build animated comparison slider videos with your own labels, so you can check an upscale against the original before you share it.

Combining engines

The Chains tab runs several engines one after another, and each step keeps its own settings. The built-in examples include "SeedVR2 2x → DLSS 5 ×3", and in one real batch, five AI images went through SeedVR2 (Upscale x4, Max Resolution 3840) followed by three DLSS 5 passes. The Past Generations tab lets you compare a SeedVR2 run with another engine's run on the same clip, using a synced slider and a table of every setting that differs.

Install and run

  1. Install the Windows requirements once with the 1-click requirements installer and its video; the requirements installer guide explains the steps.
  2. Download the app from the SECourses Upscaler Pro post, extract it and run the install and update BAT file.
  3. Start the app. Every model downloads itself on the first click, and Auto Tune sets the best settings for your GPU in under a second.

Besides SeedVR2 and FlashVSR+, the app includes RelayVSR, Open-H3 Regenerate, SparkVSR, GAN image upscalers, RIFE, face restoration and DLSS 5. For cloud use, it has automatic installers for RunPod, Massed Compute and SimplePod; see RunPod vs Massed Compute vs SimplePod. If you also make your own clips, the Wan 2.2 local video generation guide covers generation before upscaling.

FAQ

Is SeedVR2 or FlashVSR+ better for video?

For most videos, FlashVSR+: it finished about four times faster than SeedVR2 7B Sharp on the same 4K job and runs from about 8 GB of VRAM. SeedVR2 is worth the extra time on stills and short shots where you want the most natural detail.

Can I run SeedVR2 on an 8 GB GPU?

Yes, with GGUF or FP8 models and Max Blocks to Swap. The tutorial shows the batch size and blocks-to-swap setup, followed by a live 4x image upscale with SeedVR2.

Is it better than Topaz AI?

In the side-by-side tests in the tutorial video, FlashVSR+ added far more detail than Topaz AI Video Enhance on the same clips. The app's comparison slider and multi-video compare tool let you run the same check on your own footage.

Can it upscale a whole movie?

Yes. Scene detection splits the movie into chunks, the queue runs them unattended, and resume continues a stopped job. The V1 release video shows automated upscaling of movies longer than 120 minutes.

Related